LimeBug Rss Feed https://www.limebug.com/ <![CDATA[T1 68- RHD Ultrarm Pitman Arm for narrowed Beams, M12 Ends]]> Wed, 28 Jul 2021 02:33:59 +0100

T1 68- RHD Ultrarm Pitman Arm for narrowed Beams, M12 Ends

Aircooled VW Steering Lock Corrector for Narrowed Beams

Limebug Ultrarm, the solution to poor steering lock, uneven steering and fouling shocks / dampers on narrowed beams.

The Problem

The ackermann angle, when a beam is stock width is configured so the inner wheel, when in a corner will turn a tighter radius than the outer, this angle is based on the track width and length of the vehicle. 

When a narrowed beam is installed this steering relationship is compromised, this has been commonplace and a factor tolerated for years, the myth being that the beam is the root cause, not the geometry.

The Ultrarm

The ultrarm achieves perfect steering ratios, for both early and late models using late or TRW steering boxes (small spline) for both early and late Track Rod Ends, M10 and M12 respectively for both Left and Right Hand Drive models.

Each unit is manufactured in EN24 High Tensile Alloy Steel.

When installing your ultrarm, if fitting to a previously installed "stock" pitman arm, the short rod will require shortening a further 15mm in order to allow for tracking the vehicle. 


Product Code: 30040106
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4998 https://www.limebug.com/media/storage/product/4998/272x212_0695c9c1157b446b402cebe700bb3d26.jpg 127.50 GB10 Limebug 1 Cars > accessories 2.00 in stock
<![CDATA[T1 68- LHD Ultrarm Pitman Arm for narrowed Beams, M12 Ends]]> Wed, 28 Jul 2021 02:33:59 +0100

T1 68- LHD Ultrarm Pitman Arm for narrowed Beams, M12 Ends

Aircooled VW Steering Lock Corrector for Narrowed Beams

Limebug Ultrarm, the solution to poor steering lock, uneven steering and fouling shocks / dampers on narrowed beams.

The Problem

The ackermann angle, when a beam is stock width is configured so the inner wheel, when in a corner will turn a tighter radius than the outer, this angle is based on the track width and length of the vehicle. 

When a narrowed beam is installed this steering relationship is compromised, this has been commonplace and a factor tolerated for years, the myth being that the beam is the root cause, not the geometry.

The Ultrarm

The ultrarm achieves perfect steering ratios, for both early and late models using late or TRW steering boxes (small spline) for both early and late Track Rod Ends, M10 and M12 respectively for both Left and Right Hand Drive models.

Each unit is manufactured in EN24 High Tensile Alloy Steel.

When installing your ultrarm, if fitting to a previously installed "stock" pitman arm, the short rod will require shortening a further 15mm in order to allow for tracking the vehicle. 


Product Code: 30040105
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4997 https://www.limebug.com/media/storage/product/4997/272x212_bf8256f29a066fac6af530e618fb6515.jpg 127.50 GB10 Limebug 1 Cars > accessories 2.00 in stock
<![CDATA[T1 Pre-67 RHD Ultrarm Pitman Arm for narrowed Beams, M10 Ends]]> Wed, 28 Jul 2021 02:33:59 +0100

T1 Pre-67 RHD Ultrarm Pitman Arm for narrowed Beams, M10 Ends

Aircooled VW Steering Lock Corrector for Narrowed Beams

Limebug Ultrarm, the solution to poor steering lock, uneven steering and fouling shocks / dampers on narrowed beams.

The Problem

The ackermann angle, when a beam is stock width is configured so the inner wheel, when in a corner will turn a tighter radius than the outer, this angle is based on the track width and length of the vehicle. 

When a narrowed beam is installed this steering relationship is compromised, this has been commonplace and a factor tolerated for years, the myth being that the beam is the root cause, not the geometry.

The Ultrarm

The ultrarm achieves perfect steering ratios, for both early and late models using late or TRW steering boxes (small spline) for both early and late Track Rod Ends, M10 and M12 respectively for both Left and Right Hand Drive models.

Each unit is manufactured in EN24 High Tensile Alloy Steel.

When installing your ultrarm, if fitting to a previously installed "stock" pitman arm, the short rod will require shortening a further 15mm in order to allow for tracking the vehicle. 


Product Code: 30040104
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4996 https://www.limebug.com/media/storage/product/4996/272x212_d93c4b78703eef62f87cc4084c7a1119.jpg 127.50 GB10 Limebug 1 Cars > accessories 2.00 in stock
<![CDATA[T1 Pre-67 LHD Ultrarm Pitman Arm for narrowed Beams, M10 Ends]]> Wed, 28 Jul 2021 02:33:59 +0100

T1 Pre-67 LHD Ultrarm Pitman Arm for narrowed Beams, M10 Ends

Aircooled VW Steering Lock Corrector for Narrowed Beams

Limebug Ultrarm, the solution to poor steering lock, uneven steering and fouling shocks / dampers on narrowed beams.

The Problem

The ackermann angle, when a beam is stock width is configured so the inner wheel, when in a corner will turn a tighter radius than the outer, this angle is based on the track width and length of the vehicle. 

When a narrowed beam is installed this steering relationship is compromised, this has been commonplace and a factor tolerated for years, the myth being that the beam is the root cause, not the geometry.

The Ultrarm

The ultrarm achieves perfect steering ratios, for both early and late models using late or TRW steering boxes (small spline) for both early and late Track Rod Ends, M10 and M12 respectively for both Left and Right Hand Drive models.

Each unit is manufactured in EN24 High Tensile Alloy Steel.

When installing your ultrarm, if fitting to a previously installed "stock" pitman arm, the short rod will require shortening a further 15mm in order to allow for tracking the vehicle. 


Product Code: 30040103
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4995 https://www.limebug.com/media/storage/product/4995/272x212_7c0679df56095f719a0e9ff29c7ea04c.jpg 127.50 GB10 Limebug 1 Cars > accessories 2.00 in stock
<![CDATA[limebug-test]]> Fri, 23 Apr 2021 11:58:02 +0100

test

]]>
new 4994 https://www.limebug.com/media/storage/product/4994/272x212_5ccf45ab046479c0ffea2923f513d366.jpeg 0.00 GB10 Limebug 0 Cars > accessories 0.00 out of stock
<![CDATA[Manual Tankless 2-Valve Air Ride Management System, 1/4"]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 30010332
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4993 https://www.limebug.com/media/storage/product/4993/272x212_0fdcf35a34ae9c884d639276abbe19d1.jpg 370.00 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[6" x 15" Chrome / Gloss Black Detailed Fuch]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 50010126
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4992 https://www.limebug.com/media/storage/product/4992/272x212_26629b932f813b08ce65b5bbcda165ec.jpg 295.00 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[4.5" x 15" Chrome / Gloss Black Detailed Fuch]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 50010125
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4991 https://www.limebug.com/media/storage/product/4991/272x212_7bd71e2a1b7ac4e39e843fc8a560a2dd.jpg 285.00 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[Manual 2-Valve Air Ride Management System, 1/4"]]> Wed, 28 Jul 2021 02:33:59 +0100

Manual 2-Valve Air Ride Full Management System

The Ultimate in Air Ride Suspension Parts

Universal fit 2-Valve Manual control air ride management kit. Everything included to manage your front or rear air setups with 2-valve independent controls.

Wiring instructions available in our Tech Centre

2 Way Manual Air Management System

  • 1/4" Air Lines

Components

  • 2 Way Manual Controller
  • Viair 380 Compressor
  • 1/4" Air Lines
  • 4 Gallon Tank 

• Economical, simple and accurate control for single axle (2 wheels).
• Great for use with gauge and pillar pods.
• The system provides a maximum pressure of 175 psi.
• Features a VIAIR™ 100% duty cycle 380C Compressor.
• 1⁄4" air line for accurate and smooth adjustment.
• Attractive Steel switch plate.


Product Code: 30010331
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4990 https://www.limebug.com/media/storage/product/4990/272x212_80f991e80bc535cface7ac48e4e0260c.jpg 475.00 GB10 Limebug 1 Cars > accessories 12.00 in stock
<![CDATA[Manual Electric Air Ride Paddle Valve (1/4" Ports)]]> Wed, 28 Jul 2021 02:33:59 +0100

Air Ride Paddle Valve (1/4" Ports)

The Ultimate in Air Ride Suspension Parts

1/4" Port Air Ride Paddle Valve. Features include two 1/4" barbed fittings to take any DOT-approved airline, Built-in exhaust valve to the rear of the switch along with digital low current trigger circuit for solenoid/ compressor option.

This paddle valve can operate up to 200PSI of tank pressure and transfer it through its internal gate to an independent corner of your vehicle, then simply depress the switch the opposite way to allow the air to escape. A simple and easy introduction to air ride control, that can be used on a variety of applications. 

For best union use DOT approved Air Line along with 40AMP trigger relay for compressor applications, also available from Limebug

Details:
 - Sold Each (1 Valve)
 - Perfect for Manual Air Ride Systems
 - Compact Fit
 - Digital Low Current Trigger
 - Plug and Play


Product Code: 30010330
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4989 https://www.limebug.com/media/storage/noimage.jpg 45.85 GB10 Limebug 1 Cars > accessories 0.30 in stock
<![CDATA[T181 / T182 1969-83 Trekker / Thing Complete "The Revolution" Cantilever Swing Axle Air Ride Kit, Bolt on]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 30010329
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4988 https://www.limebug.com/media/storage/noimage.jpg 2415.00 GB10 Limebug 1 Cars > accessories 90.00 in stock
<![CDATA[T181 / T182 1969-83 Trekker / Thing Complete "The Revolution" Cantilever IRS Air Ride Kit, Bolt on]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 30010328
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4987 https://www.limebug.com/media/storage/noimage.jpg 2465.00 GB10 Limebug 1 Cars > accessories 90.00 in stock
<![CDATA[T181 / T182 1969-83 Trekker / Thing Deluxe "The Revolution" Cantilever Swing Axle Air Ride Kit, Bolt on]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 30010327
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4986 https://www.limebug.com/media/storage/noimage.jpg 3020.00 GB10 Limebug 1 Cars > accessories 90.00 in stock
<![CDATA[T181 / T182 1969-83 Trekker / Thing Deluxe "The Revolution" Cantilever IRS Air Ride Kit, Bolt on]]> Tue, 20 Apr 2021 10:58:18 +0100


Product Code: 30010326
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4985 https://www.limebug.com/media/storage/noimage.jpg 3065.00 GB10 Limebug 1 Cars > accessories 90.00 in stock
<![CDATA[Type 3 1956-74 T1-T3 Deluxe "The Revolution" Cantilever IRS Air Ride Kit, Bolt on]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 30010325
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4984 https://www.limebug.com/media/storage/noimage.jpg 3195.00 GB10 Limebug 1 Cars > accessories 90.00 in stock
<![CDATA[Dashboard Illumination Bulb , Capless Bulbs fits Bay Window, Karmann Ghia, T25]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 100020041
OE Code: N0177512
Any Questions, Please Contact Us Here

]]>
new 4983 https://www.limebug.com/media/storage/product/4983/272x212_a54b4370afa96542962144d6bc49ddc7.jpg 0.38 GB10 Limebug 1 Cars > accessories 0.05 in stock
<![CDATA[Dashboard Illumination Bulb Holder, Capless Bulbs fits Bay Window, Karmann Ghia, T25]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 100020040
OE Code: 141-957-397/A
Any Questions, Please Contact Us Here

]]>
new 4982 https://www.limebug.com/media/storage/product/4982/272x212_b1f4f0882f37785a159e56bc7b74919a.jpg 2.46 GB10 Limebug 1 Cars > accessories 0.07 in stock
<![CDATA[1/4" to 3/8" Plastic Style Straight Air Line Union Reducer, DOT]]> Thu, 18 Feb 2021 13:45:00 +0000


Product Code: 30010314
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4980 https://www.limebug.com/media/storage/product/4980/272x212_5fc0eb488d5af0bb6c6eaf1046eb2e68.jpg 3.99 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[3/8" BulkHead PTC Air Line Fitting]]> Thu, 18 Feb 2021 13:44:59 +0000


Product Code: 30010315
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4979 https://www.limebug.com/media/storage/product/4979/272x212_3dcbe009ec8447325e54847716da6f2b.jpg 8.45 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[1/4" BulkHead PTC Air Line Fitting]]> Thu, 18 Feb 2021 13:44:58 +0000


Product Code: 30010316
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4978 https://www.limebug.com/media/storage/product/4978/272x212_e899f16d7e07b904deab403c5d907461.jpg 6.85 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[1/4" to 1/4" to 1/4" Air Line T-Piece]]> Thu, 18 Feb 2021 13:44:57 +0000


Product Code: 30010317
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4977 https://www.limebug.com/media/storage/product/4977/272x212_de7965828b93a783c291ecb006f1f4ae.jpg 4.95 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[3/8" NPT to 1/4" PTC Air Line 90 Degree Fitting]]> Thu, 18 Feb 2021 13:44:56 +0000


Product Code: 30010318
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4976 https://www.limebug.com/media/storage/product/4976/272x212_5c81fcdfa2d6de2d0e6673a8bb5c1500.jpg 7.45 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[1/8" NPT to 3/8" PTC Air Line 90 Degree Fitting]]> Thu, 18 Feb 2021 13:44:54 +0000


Product Code: 30010319
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4975 https://www.limebug.com/media/storage/product/4975/272x212_6d86c7fb37a3818df4374bec9864c950.jpg 6.45 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[1/8" NPT to 1/4" PTC Air Line 90 Degree Fitting]]> Thu, 18 Feb 2021 13:44:53 +0000


Product Code: 30010320
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4974 https://www.limebug.com/media/storage/product/4974/272x212_10ece6df1a0445036e1761c3d7f796f8.jpg 5.45 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[1/8" NPT(F) to 3/8" PTC Air Line Straight Fitting]]> Thu, 18 Feb 2021 13:44:52 +0000


Product Code: 30010321
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4973 https://www.limebug.com/media/storage/product/4973/272x212_49b632132d46cfdb1ac8e2c8b9dc0a7d.jpg 8.85 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[1/8" NPT(F) to 1/4" PTC Air Line Straight Fitting]]> Tue, 06 Apr 2021 13:57:14 +0100


Product Code: 30010322
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4972 https://www.limebug.com/media/storage/product/4972/272x212_c3ef201f2e3b660b8ad379fb3a67bbd9.jpg 7.95 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[10mm - 4x100 PCD Wheel Spacers (Pair)]]> Thu, 11 Feb 2021 13:17:39 +0000

10mm 4x100 PCD Wheel Spacers (Pair)

Top Quality, made in the UK, Aircooled VW wheel spacers

4x100 10mm Wheel Spacers. Work with radiused or tapered bolts or lugs. Use the manufacturer recommended bolts to fit the steel / alloy wheels. 

Details:
 - Gold CAD Plated for extra long life
 - Sold in Pairs
 - Manufactured in the UK
 - 10mm Solid Laser cut components

 


Product Code: 50020019
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4971 https://www.limebug.com/media/storage/product/4971/272x212_98ad9e08a0ef358054ad7a031e0fa13d.jpg 34.95 GB10 Limebug 1 Cars > accessories 2.20 in stock
<![CDATA[10mm - 4x130 PCD Wheel Spacers (Pair)]]> Thu, 11 Feb 2021 13:17:39 +0000

10mm 4x130 PCD Wheel Spacers (Pair)

Top Quality, made in the UK, Aircooled VW wheel spacers

4x130 10mm Wheel Spacers. Work with radiused or tapered bolts or lugs. Use the manufacturer recommended bolts to fit the steel / alloy wheels. 

Details:
 - Gold CAD Plated for extra long life
 - Sold in Pairs
 - Manufactured in the UK
 - 10mm Solid Laser cut components

 


Product Code: 50020018
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4970 https://www.limebug.com/media/storage/product/4970/272x212_5166a33bf1511d4fef973a2f25b543e8.jpg 34.95 GB10 Limebug 1 Cars > accessories 2.20 in stock
<![CDATA[10mm - 5x112 PCD Wheel Spacers (Pair)]]> Thu, 11 Feb 2021 13:17:38 +0000

10mm 5x112 PCD Wheel Spacers (Pair)

Top Quality, made in the UK, Aircooled VW wheel spacers

5X112 10mm Wheel Spacers. Work with radiused or tapered bolts or lugs. Use the manufacturer recommended bolts to fit the steel / alloy wheels. 

Details:
 - Gold CAD Plated for extra long life
 - Sold in Pairs
 - Manufactured in the UK
 - 10mm Solid Laser cut components

 


Product Code: 50020017
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4969 https://www.limebug.com/media/storage/product/4969/272x212_2d0d0b7fc0e33ee7fb9906bdc9e0032a.jpg 34.95 GB10 Limebug 1 Cars > accessories 2.20 in stock
<![CDATA[10mm - 5x130 PCD Wheel Spacers (Pair)]]> Thu, 11 Feb 2021 13:17:38 +0000

10mm 5x130 PCD Wheel Spacers (Pair)

Top Quality, made in the UK, Aircooled VW wheel spacers

5X130 10mm Wheel Spacers. Work with radiused or tapered bolts or lugs. Use the manufacturer recommended bolts to fit the steel / alloy wheels. 

Details:
 - Gold CAD Plated for extra long life
 - Sold in Pairs
 - Manufactured in the UK
 - 10mm Solid Laser cut components

 


Product Code: 50020016
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4968 https://www.limebug.com/media/storage/product/4968/272x212_fe0ad213c1c163906ceb5b46d70933bc.jpg 34.95 GB10 Limebug 1 Cars > accessories 2.20 in stock
<![CDATA[Type 1 1915cc (69mm x 94mm) Zero Miles LongBlock]]> Wed, 28 Jul 2021 02:33:59 +0100

Listing is for the engine stated in title,

 

Please note other options are available on these engines, just enquire for custom specs.

 

Typical purchase too delivery time is 6 weeks.

 

Type 1 Long-Block
High-Performance Features Built Right In!

0000 Mile™ DUAL PORT LONG-BLOCK ENGINE

    8 Dowel Pin Counterweight Crankshaft
    12.5 lb. Lightweight 8 Dowel Pin Flywheel
    Chromoly 1.25 Rocker Arms (Solid Rocker Shafts & Swivel Valve Adjusting Screws
    Chromoly Gland Nut & Thick Washer
    SCAT Lightweight Racing Lifters
    SCAT Stainless Steel 5 Tab Valve Covers
    New DogHouse Oil Cooler
    Chromoly Connecting Rods


Product Code: 10010007
OE Code:
Any Questions, Please Contact Us Here]]>
new 4962 https://www.limebug.com/media/storage/noimage.jpg 3195.00 GB10 Limebug 1 Cars > accessories 250.00 in stock
<![CDATA[Type 1 1835cc (69mm x 92mm) Zero Miles LongBlock]]> Wed, 28 Jul 2021 02:33:59 +0100

Listing is for the engine stated in title,

 

Please note other options are available on these engines, just enquire for custom specs.

 

Typical purchase too delivery time is 6 weeks.

 

Type 1 Long-Block
High-Performance Features Built Right In!

0000 Mile™ DUAL PORT LONG-BLOCK ENGINE

    8 Dowel Pin Counterweight Crankshaft
    12.5 lb. Lightweight 8 Dowel Pin Flywheel
    Chromoly 1.25 Rocker Arms (Solid Rocker Shafts & Swivel Valve Adjusting Screws
    Chromoly Gland Nut & Thick Washer
    SCAT Lightweight Racing Lifters
    SCAT Stainless Steel 5 Tab Valve Covers
    New DogHouse Oil Cooler
    Chromoly Connecting Rods


Product Code: 10010006
OE Code:
Any Questions, Please Contact Us Here]]>
new 4961 https://www.limebug.com/media/storage/noimage.jpg 3195.00 GB10 Limebug 1 Cars > accessories 250.00 in stock
<![CDATA[Type 1 1776cc (69mm x 90.50mm) Zero Miles LongBlock]]> Wed, 28 Jul 2021 02:33:59 +0100

Listing is for the engine stated in title,

 

Please note other options are available on these engines, just enquire for custom specs.

 

Typical purchase too delivery time is 6 weeks.

 

Type 1 Long-Block
High-Performance Features Built Right In!

0000 Mile™ DUAL PORT LONG-BLOCK ENGINE

    8 Dowel Pin Counterweight Crankshaft
    12.5 lb. Lightweight 8 Dowel Pin Flywheel
    Chromoly 1.25 Rocker Arms (Solid Rocker Shafts & Swivel Valve Adjusting Screws
    Chromoly Gland Nut & Thick Washer
    SCAT Lightweight Racing Lifters
    SCAT Stainless Steel 5 Tab Valve Covers
    New DogHouse Oil Cooler
    Chromoly Connecting Rods


Product Code: 10010005
OE Code:
Any Questions, Please Contact Us Here]]>
new 4960 https://www.limebug.com/media/storage/noimage.jpg 3195.00 GB10 Limebug 1 Cars > accessories 250.00 in stock
<![CDATA[T1 Beetle / Ghia Gen-II Skid Plate (fits all T1 Beams)]]> Thu, 14 Jan 2021 14:00:22 +0000


Product Code: 30020083
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4959 https://www.limebug.com/media/storage/product/4959/272x212_632d1be76677799082abb905e843d8f5.jpg 28.99 GB10 Limebug 1 Cars > accessories 2.00 in stock
<![CDATA[Thrust Washer for Front Wheel Bearing Beetle Ghia Baywindow Splitscreen]]> Tue, 05 Jan 2021 12:12:23 +0000 ]]> new 4958 https://www.limebug.com/media/storage/product/4958/272x212_a44317f25f8183838b5c19080b026d68643d276a.jpg 3.90 GB10 Limebug 0 Cars > accessories 0.00 out of stock <![CDATA[15 x 4 Fumagalli Steel Wheels 5x205 PCD ET33.2 (Each)]]> Wed, 28 Jul 2021 02:33:59 +0100

15 x 4 Fumagalli Steel Wheels 5x205 PCD ET33.2 (Each)

Aircooled VW Premium Steel and Alloy Wheels

OE Style 15" Fumagalli Silver Steel Wheels.

Specs Below:

- Wheel Diameter: 15"
- Wheel Width (J Value): 4"
- ET (Offset): ET33.2
- PCD: 5x205
- Centre Cap: NA
- Mounting Hardware: Available Separately
- Quantity: Listing for one wheel, (Each)

 Wheel Terminology, PCD, Offset, J & ET Explained

What is ET?

Often times you will hear people talk about ET on a wheel, it may seem strange that ET is actually the term for offset despite the abbreviation not resembling the meaning at all the reason for this is because it is derived from the german word 'Einpresstiefe'.

So next is understanding where to measure to and from. ET is always measured from the imaginary centre line of the wheel as you can see to the left. 

Nearly all wheels you will find will be positive offset, their is a number of reasons linking to better balance of rotating mass, caliper clearance and reducing the overall width of the vehicle, however there are some exceptions.

So for the measuring process for an ET45 Offset you would take your imaginary centre line and measure 45mm toward the face of the wheel and this would be the position where the hub will mount to the wheel. 

What is PCD?

PCD, or Pitch Circle Diameter is the diameter of which wheel studs are apart through centre of the hub. PCD fitments are a measurement showing the number of studs/bolts followed by the distance they are apart. The distance is usually shown in millimetres. So a PCD of 4x130 would mean that there are 4 studs or bolt holes evenly spaced around a circle with a diameter of 130mm.

What is 'J' Width?

The letter that typically denotes the distance between the rim edges, not including the rolled edge. The terminology refers to the sectional profile of the wheel, it just happens to be the point which most manufacturers use, probably because it is a relevant measurement for choosing tyre size and is a critical measurement far more than the lip itself which could vary massively from company to company.

width figures are easily calculated with a tape measure, and can normally be found stamped in the wheel, in the cross-section on the left you can see the area highlighted in red to visually represent where this measurement is taken from.


Product Code: 50010111
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4954 https://www.limebug.com/media/storage/noimage.jpg 96.50 GB10 Limebug 1 Cars > accessories 10.00 in stock
<![CDATA[T1 Eagle Cam Gear (Standard Style) Aluminium]]> Wed, 28 Jul 2021 02:33:59 +0100

T1 Eagle Cam Gear (Standard Style) Aluminium

T1 Aircooled High Performance Cam Gears and Engine Components

The Eagle Cam Gear is a standard replacement gear for three bolt high performance camshafts. They bolt right onto all after market racing camshafts and can also be used to repair damaged gears on stock camshaft set-ups. A Stock "rivet on gear" set-up can easily be converted to this style, it simply requiresdrilling and tapping of the camshaft. Manufactured to the highest quality to assure trouble-free valve train performance.

Details:

- Suitable for T1 Engines with 3 Bolt Cam
- High Quality Aluminium product
- Perfect Gear for repairing damaged stock gear set-up.
- Ensures "Trouble-Free" Engine Performance!


Product Code: 10070028
OE Code: 1525
Any Questions, Please Contact Us Here

]]>
new 4953 https://www.limebug.com/media/storage/noimage.jpg 38.76 GB10 Limebug 1 Cars > accessories 0.65 in stock
<![CDATA[T1 CB Billet Oil Pump Cover Plate, Full Flow, Red]]> Wed, 28 Jul 2021 02:33:59 +0100

T1 CB Billet Oil Pump Cover Plate, Full Flow, Red

Aircooled VW Ful Flow Oil Pump Cover Plate Red CB Billet T1

 

CB Performance Anodized Billet Oil Pump Covers are CNC Machined from 6061 T-6 Aluminum. Designed to fit most Oil Pumps, as well as all CB Maxi Pump 1's= Anodized in your choice of Black, Blue, Red or Clear.


Product Code: 10060010
OE Code: 1848
Any Questions, Please Contact Us Here

]]>
new 4952 https://www.limebug.com/media/storage/product/4952/272x212_4984ba8476f0b3ea2c4350e3d60d04b4d778ce6f.jpg 45.16 GB10 Limebug 1 Cars > accessories 0.40 in stock
<![CDATA[1641cc Big bore piston and liner kit, 87 mm, slip in type, forged piston, MAHLE]]> Wed, 28 Jul 2021 02:33:59 +0100

Big bore piston and liner kit, 87x69 mm, slip in type, cast pistons, MAHLE

Details:
- Weight: 10.7Kg
- EAN13 Code: 5710412001124
- OE Code: AC198870
- OE Ref 1:
- OE Ref 2:
- Brand: Limebug


Product Code: 10020027
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4950 https://www.limebug.com/media/storage/product/4950/272x212_2b6c74a9f93fb351f46a54d0059dd61b088234c5.png 457.60 GB10 Limebug 1 Cars > accessories 10.70 in stock
<![CDATA[T1 Beetle / Ghia Steering Box ]]> Mon, 19 Oct 2020 13:53:51 +0100

T1 Beetle / Ghia Steering Box 

Aircooled VW Steering & Front Suspension Parts

Suitable for all Models and RHD/ LHD T1 Beetle / Ghia models, however please note if used early 60's vehicle, you may need to replace the drag link /drop arm.

Supplied ready filled with grease.

Details:
- Weight: 3.5Kg
- EAN13 Code: 5710412100858
- OE Code: 113415061C
- OE Ref 1: 111415061A
- OE Ref 2: 113415061C
- Brand: Limebug


Product Code: 30040102
OE Code: 111415061A
Any Questions, Please Contact Us Here

]]>
new 4949 https://www.limebug.com/media/storage/product/4949/272x212_8b683c61c3f2ecf09b8404937b95d156de6f6a5f.jpg 135.90 GB10 Limebug 1 Cars > accessories 4.00 in stock
<![CDATA[VW T1 T2 Electronic Ignition Bundle Without Distributor]]> Tue, 22 Sep 2020 16:10:55 +0100

VW T1 T2 Electronic Ignition Bundle Module Only

VW T1 Aircooled Electronic Ignition Parts

 

This bundle Includes:

  • 009 Electronic Ignition Module Only
  • Black 12v Ignition Coil 
  • Black 7mm Ht Leads

 

 


Product Code: 10130149
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4947 https://www.limebug.com/media/storage/product/4947/272x212_e23a88020d4e13d6fd719612db3487e7875158db.jpg 79.40 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[VW T1 T2 Electronic Ignition Bundle For Vac Advanced]]> Tue, 22 Sep 2020 16:10:55 +0100

VW T1 T2 Electronic Ignition Bundle Vac Advanced

VW T1 Aircooled Electronic Ignition Parts

 

This bundle Includes:

  • 009 Electronic Ignition Distributor (Vac Advanced)
  • Black 12v Ignition Coil 
  • Black 7mm Ht Leads

 

 


Product Code: 10130052
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4946 https://www.limebug.com/media/storage/product/4946/272x212_f7a8b424e73b389ad83d0574cb480803c7848640.jpg 135.00 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[VW T1 T2 Electronic Ignition Bundle Non Vac Advanced]]> Tue, 22 Sep 2020 16:10:54 +0100

VW T1 T2 Electronic Ignition Bundle Non Vac Advanced

VW T1 Aircooled Electronic Ignition Parts

 

This bundle Includes:

  • 009 Electronic Ignition Distributor (Non Vac Advanced)
  • Black 12v Ignition Coil 
  • Black 7mm Ht Leads

 

 


Product Code: 10130050
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4945 https://www.limebug.com/media/storage/product/4945/272x212_38ff8231c3b4117265ecad9b5685bd80768b41db.jpg 110.95 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[Jam Nut Set for Tie Rod Ends 2x RHT]]> Mon, 21 Sep 2020 11:56:35 +0100


Product Code: 30040058
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4944 https://www.limebug.com/media/storage/product/4944/272x212_2f7d58eec73f8d79f0592f38ab9bac11cf3bd490.jpg 4.70 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[T1 Beetle / Ghia Bolt on Steering Stop for Ball Joint / Link Pin Steering Box Beam Axle, Black]]> Mon, 21 Sep 2020 10:43:04 +0100

T1 Beetle / Ghia Bolt on Steering Stop for Ball Joint / Link Pin Steering Box Beam Axle

 

Also available in raw / Bare Metal option here


Product Code: 30020077
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4943 https://www.limebug.com/media/storage/product/4943/272x212_901f5338392a0e2094cba7cda28e2bb6.jpg 38.99 GB10 Limebug 1 Cars > accessories 1.50 in stock
<![CDATA[Sticker, Rat Fink Die Cut Black & White 6" Decal]]> Thu, 17 Sep 2020 17:06:25 +0100

Rat Fink Sticker Decal Black & White 6" Di Cut Ed Roth

 

Rat Fink Black & White Exterior Decal


Product Code: 80060074
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4942 https://www.limebug.com/media/storage/product/4942/272x212_52320c238fb2fd2c0554ecf7d03b60ce137f0df1.jpg 4.97 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[T1 1966-79 Beetle / Ghia Ball Joint Complete Front Air Ride Kit with Gen II Jawbreaker Beam]]> Wed, 16 Sep 2020 18:08:59 +0100

T1 1966-79 Beetle / Ghia Link-Pin Gen-II Jawbreaker Front Air Ride Beam Axle

Adjustable / Air Ride Aircooled Narrowed Modular Beams, Unlimited Upgrades / Customisation for any Application 

Narrowed front beams have become one of our foundation and most popular lines. Our Titan (Static) and Jawbreaker (Air Ride) Series beams have paved the way for simple installation and feature rich design. The recipe has remained largely unchanged since conception with narrowed beams becoming the standard for any vehicle upgrading to larger wheels/ disk brakes and getting the front of the vehicle down. 

Our Second Generation modular beam has brought a freedom to evolve your setup as requirements change. 

You Spoke, We Listened


We looked at the change in requirements from vehicles being built and customised. The Aircooled VW pan has long been the go to platform for not just custom builds of standard platform VW based vehicles, but kit cars, recreations, tributes, beach buggy's and all manner of automotive. The platform is one of the most versatile and long standing seen in any car manufacturers history, and with this comes the requirement for constant change and easily customisable front axles. 

Since Limebug's conception we have followed the change in trends through the ages and so many custom touches are added to each individuals beam for totally unique reasons the concept of a Modular Axle came to fruition. 

 

Modular Beam, What does that mean?


We has created the first of its kind, modular beam, by retaining a universal central core, the beam's end plates give options to replace and change as the styling of the vehicle evolves. this means that while the individual decisions of, design / style and application dictate the beams final form, it is infinitely up-gradable and serviceable. 

 

The System, How does it Work?


Below is an illustration of a few combinations of the Gen-II modular beam...

Choose your end plates to suit your current build, and then have the flexibility to change them in the future. 

 What does this mean for my build? Installation /  Maintaining?


Gen-II offers the expansion room to change and adapt your build with time as well as maintain and upgrade your single beam unit with minimal upkeep costs. All spares available through our website. 

Installation has been simplified another step, the beams unique design also has added benefits when fitting or mocking up. Install the centre module first, then offer up the towers after to ensure perfect inner wings every time as well as not requiring ramps or a second pair of hands for installation or removal. 

Limebug front air systems use the best air shocks available in the business, our UK built through rods with roller ends and unique locator accompanied by the highest quality air taps and fixings available.

If Ball Joint we include long travel ball joints to allow for maximum drop and Weld-on Lower Shock Relocators for Link Pin. All systems allow grease seals to be run, also available through our site.

Limebug's British 'Titan Engineering' department have been developing the most functional, innovative and beautiful parts in the scene to date. We have just introduced our Bug & Bus air ride ranges. Each kit is designed by certified and accredited engineers here at Limebug, before being tested by us personally to ensure ease of fitment and function.

These air systems come with our online video tutorial for installation and operation, as well as a manual and guide to installation. Our video includes an explanation of upgrades, year differences. Neat tricks to look out for along the way, and other great ways to give you VW the look you've dreamt of without the nightmares.

Titan Through Rods Explained

 

T1 RHD / LHD 4" Narrowed Track / Tie Rods:

Professionally Engineering Track Rods from Limebug for all Aircooled VW's stock width or narrowed.

High grade CDS turned seamless tubing is the foundation to building up our through rods, twinned with optional OE quality track rod ends and a hard wearing durable powder coat, this is the only sensible way to narrow your VW Beetle / Ghia.

We also produce these track rods in a stock width, meaning when the track rod end wears out you are not stuck with having to throw away the long rod as factory ends are crimped into place.

These feature, German Quality Track Rod Ends, and UK manufactured Track Rods. All Rods are made to our Width guides, and suited to LHD or RHD Appropriately.

If you have a special requirement or excessively narrowed vehicle we can accommodate this, at additional timescale.

Options:
 - Track Width upto 4" Narrowed Available. All track rods feature adjustment slots for easy tracking alignment.
 - Hardware includes 2x LH and 2x RH threaded pinch nuts for security when fitted.
 - All Track rods are supplied with a Steering damper eyelet as standard.
 - M10 or M12 Stud Sizes available in all four configurations.

 

Titan Engineering T1 Beetle / Ghia "Mine Sweeper" Skid Plate

Compatible with all Titan, Jawbreaker and Original Aircooled VW Beams

Features a steep ramped front edge to deflect the road and debris away from your beam when running extra low. Protects your adjuster unit as well as still allowing access through the front of skid plate.

Minesweeper plates are provided raw unless otherwise stated. Comes with two extended frame head bolts and washers which is all that is required for fitting.

The Minesweeper features a totally unique pellet system where interchangeable bolts can be fitted through the skid plate.  As standard we provide each skidplate with stainless pellets. These give a bright Yellow Short Spark Trail. We offer pellets to give your choice of White, Yellow, Short and Long Sparks with your skid plate. Once worn through, simply remove the skidplate and remove the old pellets, then refit the new ones. Also it is possible to mix and match to create multiple coloured spark trails.  


Product Code: 30010313
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4941 https://www.limebug.com/media/storage/product/4941/272x212_a9eb8cfac775d26b1f7baecea0a0ce8619449d28.jpg 1125.00 GB10 Limebug 1 Cars > accessories 45.00 in stock
<![CDATA[T1 1950-65 Beetle / Ghia Link Pin Complete Front Air Ride Kit with Gen II Jawbreaker Beam]]> Thu, 17 Sep 2020 15:36:04 +0100

T1 1950-65 Beetle / Ghia Ball Joint Gen-II Titan Front Air Ride Beam Axle

Adjustable / Air Ride Aircooled Narrowed Modular Beams, Unlimited Upgrades / Customisation for any Application 

Narrowed front beams have become one of our foundation and most popular lines. Our Titan (Static) and Jawbreaker (Air Ride) Series beams have paved the way for simple installation and feature rich design. The recipe has remained largely unchanged since conception with narrowed beams becoming the standard for any vehicle upgrading to larger wheels/ disk brakes and getting the front of the vehicle down. 

Our Second Generation modular beam has brought a freedom to evolve your setup as requirements change. 

You Spoke, We Listened


We looked at the change in requirements from vehicles being built and customised. The Aircooled VW pan has long been the go to platform for not just custom builds of standard platform VW based vehicles, but kit cars, recreations, tributes, beach buggy's and all manner of automotive. The platform is one of the most versatile and long standing seen in any car manufacturers history, and with this comes the requirement for constant change and easily customisable front axles. 

Since Limebug's conception we have followed the change in trends through the ages and so many custom touches are added to each individuals beam for totally unique reasons the concept of a Modular Axle came to fruition. 

 

Modular Beam, What does that mean?


We has created the first of its kind, modular beam, by retaining a universal central core, the beam's end plates give options to replace and change as the styling of the vehicle evolves. this means that while the individual decisions of, design / style and application dictate the beams final form, it is infinitely up-gradable and serviceable. 

 

The System, How does it Work?


Below is an illustration of a few combinations of the Gen-II modular beam...

Choose your end plates to suit your current build, and then have the flexibility to change them in the future. 

 What does this mean for my build? Installation /  Maintaining?


Gen-II offers the expansion room to change and adapt your build with time as well as maintain and upgrade your single beam unit with minimal upkeep costs. All spares available through our website. 

Installation has been simplified another step, the beams unique design also has added benefits when fitting or mocking up. Install the centre module first, then offer up the towers after to ensure perfect inner wings every time as well as not requiring ramps or a second pair of hands for installation or removal. 

Limebug front air systems use the best air shocks available in the business, our UK built through rods with roller ends and unique locator accompanied by the highest quality air taps and fixings available.

If Ball Joint we include long travel ball joints to allow for maximum drop and Weld-on Lower Shock Relocators for Link Pin. All systems allow grease seals to be run, also available through our site.

Limebug's British 'Titan Engineering' department have been developing the most functional, innovative and beautiful parts in the scene to date. We have just introduced our Bug & Bus air ride ranges. Each kit is designed by certified and accredited engineers here at Limebug, before being tested by us personally to ensure ease of fitment and function.

These air systems come with our online video tutorial for installation and operation, as well as a manual and guide to installation. Our video includes an explanation of upgrades, year differences. Neat tricks to look out for along the way, and other great ways to give you VW the look you've dreamt of without the nightmares.

Titan Through Rods Explained

 

T1 RHD / LHD 4" Narrowed Track / Tie Rods:

Professionally Engineering Track Rods from Limebug for all Aircooled VW's stock width or narrowed.

High grade CDS turned seamless tubing is the foundation to building up our through rods, twinned with optional OE quality track rod ends and a hard wearing durable powder coat, this is the only sensible way to narrow your VW Beetle / Ghia.

We also produce these track rods in a stock width, meaning when the track rod end wears out you are not stuck with having to throw away the long rod as factory ends are crimped into place.

These feature, German Quality Track Rod Ends, and UK manufactured Track Rods. All Rods are made to our Width guides, and suited to LHD or RHD Appropriately.

If you have a special requirement or excessively narrowed vehicle we can accommodate this, at additional timescale.

Options:
 - Track Width upto 4" Narrowed Available. All track rods feature adjustment slots for easy tracking alignment.
 - Hardware includes 2x LH and 2x RH threaded pinch nuts for security when fitted.
 - All Track rods are supplied with a Steering damper eyelet as standard.
 - M10 or M12 Stud Sizes available in all four configurations.

 

Titan Engineering T1 Beetle / Ghia "Mine Sweeper" Skid Plate

Compatible with all Titan, Jawbreaker and Original Aircooled VW Beams

Features a steep ramped front edge to deflect the road and debris away from your beam when running extra low. Protects your adjuster unit as well as still allowing access through the front of skid plate.

Minesweeper plates are provided raw unless otherwise stated. Comes with two extended frame head bolts and washers which is all that is required for fitting.

The Minesweeper features a totally unique pellet system where interchangeable bolts can be fitted through the skid plate.  As standard we provide each skidplate with stainless pellets. These give a bright Yellow Short Spark Trail. We offer pellets to give your choice of White, Yellow, Short and Long Sparks with your skid plate. Once worn through, simply remove the skidplate and remove the old pellets, then refit the new ones. Also it is possible to mix and match to create multiple coloured spark trails.  


Product Code: 30010312
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4940 https://www.limebug.com/media/storage/product/4940/272x212_dc82b6670690676113063cab7ddfcc7ea7c3686c.jpg 1095.00 GB10 Limebug 1 Cars > accessories 45.00 in stock
<![CDATA[T1 Beetle Igniton Barrel Switch 1958-1967 Replacement]]> Wed, 28 Jul 2021 02:33:59 +0100

VW Beetle Ignition Switch & Barrel for T1 1958-1967

Aircooled VW Electrical Components / Ignition Barrels

Standard replacement ignition barrel complete with switch.

Fits:

T1 1958-1967 Beetle & Cabrio Models


Product Code: 100040024
OE Code: 111-905-803/D
Any Questions, Please Contact Us Here

]]>
new 4939 https://www.limebug.com/media/storage/noimage.jpg 22.65 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[VW T1 1955-1967 Early Chrome Handle Door Beetle Reproduction Lever]]> Thu, 10 Sep 2020 16:29:45 +0100

Classic T1 1955-67 Early Beetle Chrome Interior Door Handle

Classic Volkswagen Interior Parts available from Limebug

These are suitable for EARLY BEETLES ONLY (1955-1967)

Please note these are reproductions and may not be as of good quality as the OE item.

This listing is for 1x Door Handle

DOES NOT INCLUDE DOWEL LOCKING PIN


Product Code: 90030045
OE Code: 113-837-225/A
Any Questions, Please Contact Us Here

]]>
new 4938 https://www.limebug.com/media/storage/product/4938/272x212_7bc85840cf3e18021a1f5557600c8d81a908750c.jpg 7.65 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[VW T1 Ball Joint Stock Height Front Disc Brake Kit 4x130 Beetle T3 Ghia Disk]]> Wed, 09 Sep 2020 16:31:35 +0100

T1 1967-79 Ball Joint Stock Height Disk Brake Kit - 4x130

Complete Brake Conversion Kits supplied by Limebug

This is a standard disc brake conversion kit with Standard 1968 onwards disc brake spindles.
The kit includes all required components to bolt later 4x130 stud pattern discs to the vehicle.

The kit is supplied with stock discs, bearings, callipers, brake hoses and hardware.

Not suitable for 1303 platform vehicles.


Product Code: 40010005
OE Code: AC698000
Any Questions, Please Contact Us Here

]]>
new 4937 https://www.limebug.com/media/storage/noimage.jpg 322.45 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[VW T2 Bay Window Late 1972-79 4100mm Left Heater Cable O/S]]> Wed, 09 Sep 2020 16:31:34 +0100

4100mm Right Heater Cable for Volkswagen T2 Bay Window Bus

Replacement Heater Control Cables for Classic Aircooled VW Vehicles

Replace your worn or broken Heater cable with this new OE style reproduction
Nearside (Left) good quality heater cable

Fits:

T2 1972 - '79

 


Product Code: 60010010
OE Code: 211-711-629/N
Any Questions, Please Contact Us Here

]]>
new 4936 https://www.limebug.com/media/storage/noimage.jpg 18.95 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[VW T2 Bay Window Late 1972-79 4225mm Right Heater Cable O/S]]> Wed, 09 Sep 2020 16:31:34 +0100

4225mm Right Heater Cable for Volkswagen T2 Bay Window Bus

Replacement Heater Control Cables for Classic Aircooled VW Vehicles

Replace your worn or broken Heater cable with this new OE style reproduction
Offside (Right) good quality heater cable

Fits:

T2 1972 - '79

 


Product Code: 60010009
OE Code: 211-711-630/N
Any Questions, Please Contact Us Here

]]>
new 4935 https://www.limebug.com/media/storage/noimage.jpg 18.95 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[VDO Oil Temperature Sender Relief Screw Mounted 1200-1600cc]]> Wed, 09 Sep 2020 16:31:33 +0100

VDO Oil Temperature Sender for 300 Degree Fahrenheit Gauges. Replaces the Original Oil Pressure Relief Screw.

VW Classic Oil Temperature Senders available from Limebug

This replaces the oil screw only - you must retain the oil relief spring and piston. This sender cannot be used on Type 4 or WBX engines - Use V323100 & V323888 instead. Fits AutoMeter Gauges.

For Vehicles:
Beetle 1950-1979 | Beetle Cabrio 1950-1979 | Karmann Ghia 1960-1974 | T2 Bay 1968-1979 | T2 Split 1950-1967

 


Product Code: 10060150
OE Code: V323064
Any Questions, Please Contact Us Here

]]>
new 4934 https://www.limebug.com/media/storage/product/4934/272x212_f9bf1cf813a4a218063c6f5de7942911.jpg 23.65 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[Viair "Your Vital Air Source" Sticker Vinyl Decal]]> Wed, 09 Sep 2020 16:31:33 +0100

Viair "Your Vital Air Source" Sticker Vinyl Sticker Decal

Full range of Stickers Decals available from Limebug

Brand new sticker from Viair Corporation

Measurements are as follows:
180mm x 45mm


Product Code: 80060080
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4933 https://www.limebug.com/media/storage/product/4933/272x212_d437d09439fed735dc1044d2cb817e46ced4904c.jpg 2.80 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[VW Classic T2 Split Screen 1957-66 Chrome Headlamp Rim Headlight Ring]]> Wed, 09 Sep 2020 16:31:30 +0100

VW Classic T2 Split Screen 1957-66 Chrome Headlamp Rim Headlight Ring

VW Classic Aircooled Beetle & Splitscreen Headlight Components

T1 & T2 Chrome headlamp rim for early sloping vehicles. Headlamp screws are positioned 10 past 8 clock formation. Sunny Climate Chrome. Sold Individually.


Product Code: 100010089
OE Code: 111-941-111/CR
Any Questions, Please Contact Us Here

]]>
new 4924 https://www.limebug.com/media/storage/noimage.jpg 17.80 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[VW T2 Split Screen IRS Conversion A Arm Brackets 1950-1967]]> Tue, 08 Sep 2020 17:33:04 +0100


Product Code: 30900009
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4923 https://www.limebug.com/media/storage/product/4923/272x212_b4e0bf34815c4f1621befaa2ea3bcacac9b3189b.jpg 35.95 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[Clay Smith Front Facing Decal Mr Horsepower With Attitude]]> Mon, 07 Sep 2020 16:45:44 +0100


Product Code: 80060073
OE Code: CSD29
Any Questions, Please Contact Us Here

]]>
new 4922 https://www.limebug.com/media/storage/product/4922/272x212_9405a0af9896ac9cce60cf4b26dd6e0592183eec.jpg 6.50 GB10 Limebug 1 Cars > accessories 0.00 in stock
<![CDATA[T1 Titan Wilwood 4 Pot Beetle / Ghia 66- Ball Joint 5x130 Porsche Front Disk Brake Conversion Kit]]> Mon, 24 Aug 2020 12:09:44 +0100

T1 Titan Wilwood 4 Pot Beetle / Ghia 68- Ball Joint 5x130 Porsche Front Disk Brake Conversion Kit

Titan Engineering Performance Aircooled VW Beetle / Ghia Brake Kit

The Wilwood / Limebug Aircooled VW Beetle / Karmann Ghia Bolt on brake conversion kit offers the first straight fit 4 pot, all aluminium adaptor and caliper performance drilled disk brake kit. Includes everything to carry out your conversion and works with stock dual master circuit (68-) master cylinders and will attach straight into factory OEM VW brake lines. 

This format is sold in 5x130PCD Porsche Pattern


Product Code: 40020057
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4912 https://www.limebug.com/media/storage/product/4912/272x212_23b1ab9fccebb9c42c5fd97589e27b6120b47b87.jpg 995.00 GB10 Limebug 1 Cars > accessories 10.00 in stock
<![CDATA[T1 1950-79 Beetle / Ghia Original Deluxe Swing Axle Air Ride Kit, Bolt on]]> Thu, 20 Aug 2020 12:31:51 +0100

T1 Deluxe 1950-79 Beetle / Ghia Complete Swing Axle Air Ride Kit (Bolt on)

The Ultimate Aircooled VW Bolt on Air ride system, the industry leading T1 Beetle / Ghia Air Suspension Option

Looking to lower you Aircooled Volkswagen the right way with air suspension. Look no further. 

The Limebug deluxe air ride kit is the complete solution to taking a totally stock Beetle / Ghia with no modifications and converting completely including total narrowing of the front axle with fully built and assembled track rods, and then of course all the custom air suspension gear designed by our engineers here in the UK. This kit is the most conclusive solution to air ride for Aircooled VW's to date. No system touches this kit for quality, ease and simplicity of fitting and beautiful functionality. 

Limebug is the only Aircooled VW specialist offering fully bolt on, true air systems (this means we do not utilise any of the original torsion bar system, and give you the full, maximum travel available).

What is the difference between your Complete and Deluxe Air Systems?

The main difference is you will get a Beam and Track Rods with a Deluxe system, the reason for the two kits is primarily down to a lot of people have already a front axle they want to use. This complete Air Ride is for these people. If you have a totally stock vehicle and want to narrow and put on air ride, the Deluxe kit is for you.

To summarize:

- Deluxe Kit = Full Air Ride System + Everything to Narrow your Front End
- Complete Kit = Full Air Ride System

Key Features:

Control your Ride, everywhere!

Simply using our manual paddle valve or digital systems, the kit allows over 7" of travel meaning no problem with steep driveways, speed bumps, cats eyes, potholes, rutted fields, getting on and off a ferry etc etc.

Titan Six-Point Brace System

Uniquely designed using the shock towers for lateral loading and using pre-load bars to the gearbox mount along with a cupped mount around the torsion tube housing. This system allows pre-load and left-right and front-back tweaks. This system prevents ""creep"" and chassis movement by adding strength to the existing structure in the same way as a strut brace.

Lay-it-out

No compromise, drop it to the deck design, you may wonder if the design of this kit restricts upper and lower travel, the answer simply is no. This kit will drop the spring plate (if notched or stepped) to bottom out metal-metal on the upper chassis bump stop with the rubber removed. Trust us, that is low.

Save your Fulcrums and Bearings

Commonplace faults with static lowering your vehicle is chewwing up fulcrum plates and wheel bearings from oil starvation, as well as tyre wear from continuous toeing in. Air ride gives you the ability to adjust the ride height to give you the best of both worlds, slam it for the shows, daily drive it in absolute comfort.

Bolt on also means, Bolt Off

So keep hold of your old parts, if you have enough of the car or want a new one, sell the kit on or transfer it, no need to re-buy.

Upgradable by design

our system is designed and configured to work with Manual paddle air systems, solenoids and the Digital Management systems from all leading manufacturers, as long as you are looking to use imperial 1/4" line a Limebug air system will work.

Straight out the Box

All kits come Powder Coated in a thick hard wearing Gloss Black, all hardware required to fit to any stock Beetle or Ghia is included. The only optional extras we offer are notched spring plates which we do recommend but are not essential in order to fit the kit if you intend to drive around at close to stock height normally.

Simple Installation

the kit can be installed in 2 days with no issue and moderate experience, we provide a full online pdf step by step tutorial, an online video guide and are available on the phone 10:00-18:00 weekdays.

Air Management

4-Valve Manual Air Management. Ultising a 4 gallon tank, twin dual needle gauges, air cut off switch. Our kit uses Viair 380c compressor available also as a dual kit. Fit the manual paddle gauges in the dash or glovebox. Comes with Stainless mounting plate. All gauges use 1/4"" line.

T1 Jawbreaker 4" Narrowed Air Ride Beam

Aircooled VW Beetle and Ghia 4 Inch Narrowed Beams, the industry standard in quality

Titan Engineering T1 Beetle Beam 4" narrowed, installation is simple and easy with no body modifications. Each beam is built by robots in the UK and fettled to spec by hand. Limebug is the leading supplier of narrowed beams in the industry.

Each beam is produced from CDS (Cold Drawn Steel) Seamless tubing, then turned to length, each adjuster slot is then milled into the tubing along with the 4x grease points. Next we fit our custom Xero adjusters in place which give over 7.5" of adjustment travel. These adjusters are set in place in such a way as to achieve maximum drop and still give a great range of upper adjustment on nearly all configurations. 

Next we laser cut 8mm steel into our beautifully designed end plates, these are then CNC press braked to form a dog leg which will clear all factory inner wings on your new 4" beam with no cutting, welding or drilling. Now we fit a turned 12x1.5mm solid threaded boss into the upper shock tower. Our shock towers are oversize in length to allow you to run your stock shocks for mild lowering and our gas charged shocks for the extra low Beetle / Ghia owners. 

For the final step in the metal core assembly process, we precision load the components into the robot welding cell, at this point we fit our ramped base 'uprights' which have oversize holes for simple easy installation on all frame heads. 

Now the core is built we install our uniquely designed grease cavity / Delrin bushings system. This configuration allows the use of Delrin bushes which have great low wearing properties and will not damage your trailing arms over time, they also do not squeak like Urethane. Finally this also allows you to run factory grease seals keeping your grease in the beam, where it should be. 

So that's how the industry standard of narrowed front axle is made and some of the fantastic features it offers. All beams have the option to a powder coated finish, RHD / LHD,  torsion leaves, track rods etc etc. Let Limebug cut out the guesswork and have a hassle free install.

We can now offer worldwide shipping on all Limebug beams. Typically holding over one hundred beam cores on the shelf we can supply the industry standard in quality and finish.


Details:
 - CDS Mech Grade Tubing
 - Gusseted Shock Tower to allow for fully weight baring Shocks
 - 8mm Lasercut End-plates
 - CNC Body Mounts & Shock Mounts
 - Dog Leg Shock Tower Support
 - Unique Grease Cavity System
 - 12x1.5mm Threaded Welded Upper Boss
 - Genuine Derlin Bushes
 - 4x Grease Nipples Fitted 
 - Custom Steering Damper Mount Fitted
 - RHD or LHD
 - Supplied in Raw Finish or Powdercoated
 - Designed, Manufactered and Assembled in the UK

T1 RHD / LHD 4" Narrowed Track / Tie Rods:

Professionally Engineering Track Rods from Limebug for all Aircooled VW's stock width or narrowed.

High grade CDS turned seamless tubing is the foundation to building up our through rods, twinned with optional OE quality track rod ends and a hard wearing durable powder coat, this is the only sensible way to narrow your VW Beetle / Ghia.

We also produce these track rods in a stock width, meaning when the track rod end wears out you are not stuck with having to throw away the long rod as factory ends are crimped into place.

These feature, German Quality Track Rod Ends, and UK manufactured Track Rods. All Rods are made to our Width guides, and suited to LHD or RHD Appropriately.

If you have a special requirement or excessively narrowed vehicle we can accommodate this, at additional timescale.

Options:
 - Track Width upto 4" Narrowed Available. All track rods feature adjustment slots for easy tracking alignment.
 - Hardware includes 2x LH and 2x RH threaded pinch nuts for security when fitted.
 - All Track rods are supplied with a Steering damper eyelet as standard.
 - M10 or M12 Stud Sizes available in all four configurations.

Front System Details:

Limebug front air systems use the best air shocks available in the business, our UK built through rods with roller ends and unique locator accompanied by the highest quality air taps and fixings available.

If Ball Joint we include long travel ball joints to allow for maximum drop and Weld-on Lower Shock Relocators for Link Pin. All systems allow grease seals to be run, also available through our site.

Limebug's British 'Titan Engineering' department have been developing the most functional, innovative and beautiful parts in the scene to date. We have just introduced our Bug & Bus air ride ranges. Each kit is designed by certified and accredited engineers here at Limebug, before being tested by us personally to insure ease of fitment and function.

These air systems come with our online video tutorial for installation and operation, as well as a manual and guide to installation. Our video includes an explanation of upgrades, year differences. Neat tricks to look out for along the way, and other great ways to give you VW the look you've dreamt of without the nightmares.

Titan Through Rods Explained

Rear System Details:

The Limebug rear air ride kit is the only air system that is fully bolt on with almost no compromises. You do not need to remove the body from the chassis, nor drill or cut anything, nor swap your axles for late ones if you have an early model (Pre-58). This kit will bolt straight on to any completely stock VW Beetle / Ghia.

All you need to know to get started is the following, you will need to be able to remove your engine/ gearbox and will have to remove the heat exchangers from your engine and replace with J-Tubes and then in some cases move your rear brake lines. That's it!

Want to know the travel, the rear kit is restricted only by the spring plates (which we offer as an optional extra on here). These dog leg around the chassis stops giving you even more lows and the second thing is the compressed shock length which for the rear kits we provide as standard at 255mm compressed.

VW Beetle Rear Air Ride Kit - Fitting / Installation Video Guide (Vehicle in video is 1966)

Optional Extras

 - 2" Dropped Air Plates: These plates will increase the amount of drop you can achieve and resolve toeing in issues at low running heights. They also have recently recieved an update which now means they run a shorter bore tube stopping rubbing on the outer torsion cover and use 2" Inner Diameter bushes making them overall much stiffer and give better feel to the rear end.

 - Year Options: As standard we make the late post 1959 air ride kit, if you require a kit for an early vehicle running short axles (straight shock mounts), select this from the dropdown menu.

 - Skid Plate: Protect your framehead with our made to fit any year/ model and beam skid plate.

 - Management: Pick from 4 valve manual controls, air pressure sensitve digital systems or ride height intelligent systems.

Additional Documents

Air Ride Fitting Guide
Air Ride FAQ's

Please note: This Kit is made for off-road use only therefore NO Warranty or Guarantee is issued or implied.

Important Operational Info: Must Read!!!

When operating your air ride kit, you must understand that you now have total free range to move the suspension to its mechanical upper and lower limits. The air bags used are strong enough to lift the weight of almost two Beetles per bag. In order to maintain be sure never to exceed the mechanical limits of your vehicle.

For Link Pin front setups, with no mechanical restriction be aware over pressurisation will cause the shock to foul the front trailing arm. Be sure to inspect the vehicle with the wheels off and run the car through the travel noting the upper limit PSI, be sure also to never try and collapse an air shock with 0PSI, this will force the rubber bag sleeve between the shock body and cause chaffing/ cutting. 

For Ball Joint front setups using standard front shocks, be aware to tie back the air shock pipe running on the lower line to avoid chaffing and insure you have adequate clearance for the upper rubber bag under expansion. Again, note upper and lower limits as with the Link Pin models.

Also consider with Ball Joint models, when you reach the mechanical limit of your Ball Joints you will risk damage by adding more pressure. 

If running T1 rear air kit, be aware of your steel and rubber bump stops, once you hit these the kit has nowhere to go and you will only apply more stress to the kit, the first sign you will get is a twist in your lower brackets, if you continue to apply pressure after this point you will cause more damage to surrounding areas. Again, to set up this area as with the front, have a friend monitor the height of the rear of your car when you do initial setup. 

Also at this point consider that swing axle vehicles will lift considerably higher as soon as they move once air'd up due to the camber of the rear axle. When setting your ride heights do so applying pressure then drive the vehicle around approx 10-20 metres to allow the axles to re-settle then tweak and repeat until satisfied.

When Jacking the vehicle up always place the vehicle onto ramps or a jack, then let all the air out of the four corners to avoid an over pressurization situation when lifting the vehicle, then lift the vehicle off the ground afterwards.

If ever leaving your vehicle with a garage or MOT centre unfamiliar with air suspension, make them aware of the upper limits and inspect before and after picking the vehicle up to check for damage.

Always operate between 90-95% of the upper range NEVER 100%. As a general guide line rear kits rear their upper limits at approx 90PSI. The front around 130PSI. If you exceed these limits you WILL cause long lasting damage to the air ride kit brackets / trailing arms / shocks / Hardware.

If you drive the vehicle excessively low you will cause damage to your front axle / beam trailing arms along with the frame head. Always lift the car up to a suitable drive height and maintain air and mechanical joints and unions. 

One final note if you put in a really high pressure and rear the mechanical limits be aware you will be damaging the vehicle even for a very short burst. Be careful and considerate to your air kit and you will enjoy many, many miles of hassle free driving fun.

MUST READ BEFORE INSTALLING!!!

When you first install your air shocks you must inflate them before dropping the vehicle down, if you do not do this the rubber sleeve will be forced inside the metal tube of the shock body. This will create a nick in the edge of the rubber bag meaning it will leak. You only need to do this on the first use as it will separate the bag from its manufacturer coating and unseal itself from the inner stem. Insure you have at least 10psi in before dropping.

If you are in any doubt and have a kit or considering purchase of a system and need more information, call us on 01782 922047 or email on: vwparts@limebug.com


Product Code: 30010311
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4911 https://www.limebug.com/media/storage/product/4911/272x212_433c28690b28a6410183a5fd2b51133d1cc6f840.jpg 2585.50 GB10 Limebug 1 Cars > accessories 85.00 in stock
<![CDATA[MST High Lift Billet Aluminium Rocker Covers Orange]]> Wed, 19 Aug 2020 17:36:15 +0100

MST High Lift Billet Anodized Aluminium Rocker Covers:

These covers include a rubber mounting gasket and are made from 6061-T6 Aluminum Plate.

Fins will be excluded to allow for ease of cleaning and for a much cleaner cosmetically pleasing appearance.

MST logo centered on the face. Top or Side Ventilation available upon request.

The following hardware included: Stand-off nuts, flatwashers, button head allen screws, and o-rings.

Please inquire for prices regarding Full Flow Options.


Product Code: 10080025
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4910 https://www.limebug.com/media/storage/product/4910/272x212_20d8fd60dfbdb0c0653a1005f7d10d818f8fd2a5.jpg 185.95 GB10 Limebug 1 Cars > accessories 2.30 in stock
<![CDATA[MST High Lift Billet Aluminium Rocker Covers Blue]]> Wed, 19 Aug 2020 17:36:14 +0100

MST High Lift Billet Anodized Aluminium Rocker Covers:

These covers include a rubber mounting gasket and are made from 6061-T6 Aluminum Plate.

Fins will be excluded to allow for ease of cleaning and for a much cleaner cosmetically pleasing appearance.

MST logo centered on the face. Top or Side Ventilation available upon request.

The following hardware included: Stand-off nuts, flatwashers, button head allen screws, and o-rings.

Please inquire for prices regarding Full Flow Options.


Product Code: 10080024
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4909 https://www.limebug.com/media/storage/product/4909/272x212_2e633a0f18244ad2c2479ba5d90463a21a5c2253.jpg 185.95 GB10 Limebug 1 Cars > accessories 2.30 in stock
<![CDATA[MST High Lift Billet Aluminium Rocker Covers Clear]]> Wed, 19 Aug 2020 17:36:13 +0100

MST High Lift Billet Anodized Aluminium Rocker Covers:

These covers include a rubber mounting gasket and are made from 6061-T6 Aluminum Plate.

Fins will be excluded to allow for ease of cleaning and for a much cleaner cosmetically pleasing appearance.

MST logo centered on the face. Top or Side Ventilation available upon request.

The following hardware included: Stand-off nuts, flatwashers, button head allen screws, and o-rings.

Please inquire for prices regarding Full Flow Options.


Product Code: 10080023
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4908 https://www.limebug.com/media/storage/product/4908/272x212_c28ad596ac36cfa12730bc063a171d6ec56d6e09.jpg 185.95 GB10 Limebug 1 Cars > accessories 2.30 in stock
<![CDATA[MST High Lift Billet Aluminium Rocker Covers Black]]> Wed, 19 Aug 2020 17:36:11 +0100

MST High Lift Billet Anodized Aluminium Rocker Covers:

These covers include a rubber mounting gasket and are made from 6061-T6 Aluminum Plate.

Fins will be excluded to allow for ease of cleaning and for a much cleaner cosmetically pleasing appearance.

MST logo centered on the face. Top or Side Ventilation available upon request.

The following hardware included: Stand-off nuts, flatwashers, button head allen screws, and o-rings.

Please inquire for prices regarding Full Flow Options.


Product Code: 10080022
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4907 https://www.limebug.com/media/storage/product/4907/272x212_1fd0b4b8727d134f312c8eb5810db1a9c933e4e3.jpg 185.95 GB10 Limebug 1 Cars > accessories 2.30 in stock
<![CDATA[T1 Beetle Brake Line Master Cylinder to T-piece Hardline]]> Mon, 17 Aug 2020 17:59:23 +0100

T1 Beetle Brake Line Master Cylinder to T-piece Hardline

Aircooled VW Classic T1 Beetle Brake and Master Cylinder Parts

Connecting brake hardline from Master Cylinder to T-piece


Product Code: 40040037
OE Code: 311611741
Any Questions, Please Contact Us Here

]]>
new 4906 https://www.limebug.com/media/storage/product/4906/272x212_14d5f56c27dee76bc92f5eb13000a20de3860150.jpg 9.85 GB10 Limebug 1 Cars > accessories 1.20 in stock
<![CDATA[T1 T2 T3 Oil Sump plate Including Drain Plug with Gaskets 1200 - 1600 cc]]> Mon, 17 Aug 2020 17:59:22 +0100

T1 T2 T3 Oil Sump plate Including Drain Plug with Gaskets 1200 - 1600 cc

Aircooled VW Classic Oil Sump Parts

Sump plate including drain plug and gaskets for T1 T2 and T3 Models, will fit engine sizes from 1200cc - 1600cc. Will not fit T4 Engines.


Product Code: 10060119
OE Code: 113115181A
Any Questions, Please Contact Us Here

]]>
new 4904 https://www.limebug.com/media/storage/product/4904/272x212_73a8e387960cb4533eb7e609c01cf56e15437ccd.jpg 9.25 GB10 Limebug 1 Cars > accessories 1.00 in stock
<![CDATA[T1 T3 Beetle / Ghia Handbrake Lever Arm Right]]> Mon, 17 Aug 2020 17:59:22 +0100

T1 Beetle / Ghia Handbrake Lever Arm Right

Aircooled VW Classic Brake Parts

T1 / T3 Handbrake lever Right only.


Product Code: 40060046
OE Code: 113609614A
Any Questions, Please Contact Us Here

]]>
new 4903 https://www.limebug.com/media/storage/noimage.jpg 9.00 GB10 Limebug 1 Cars > accessories 0.20 in stock
<![CDATA[T1 T3 Beetle / Ghia Handbrake Lever Arm Left]]> Mon, 17 Aug 2020 17:59:21 +0100

T1 Beetle / Ghia Handbrake Lever Arm Left

Aircooled VW Classic Brake Parts

T1 / T3 Handbrake lever left only.


Product Code: 40060045
OE Code: 113609613A
Any Questions, Please Contact Us Here

]]>
new 4902 https://www.limebug.com/media/storage/product/4902/272x212_800e8568bc36df514060944efbe1bc58ace4e5a5.jpg 9.00 GB10 Limebug 1 Cars > accessories 0.20 in stock
<![CDATA[T1 Beetle / Ghia Fuel Tank Retaining Plate each]]> Mon, 17 Aug 2020 17:59:21 +0100

T1 Beetle / Ghia Fuel Tank Retaining Plate each

Aircooled VW Classic Carburettor and Fuel Parts

Retaining plate for T1 Fuel Tank Sold each. 4x required per vehicle.


Product Code: 10090237
OE Code: 113201635
Any Questions, Please Contact Us Here

]]>
new 4901 https://www.limebug.com/media/storage/product/4901/272x212_0b9a32e25b1869f6e2353c2ec91564bd24e87619.jpg 2.35 GB10 Limebug 1 Cars > accessories 0.05 in stock
<![CDATA[T1 T2 T3 Retaining Plate for front Hub Nut Lock Plate each]]> Mon, 17 Aug 2020 17:59:21 +0100

T1 T2 T3 Retaining Plate for front Hub Nut Lock Plate each

Aircooled VW Classic Suspension Hardware Parts

Retaining plate for hub nut, 2x required for 1 car. Clips are sold each.


Product Code: 30070036
OE Code: 111405681
Any Questions, Please Contact Us Here

]]>
new 4900 https://www.limebug.com/media/storage/product/4900/272x212_16a5593b212aafe6ea01f679c1826e309e9ed7f6.jpg 1.85 GB10 Limebug 1 Cars > accessories 0.02 in stock
<![CDATA[T2 Baywindow Shift Rod Boot / Gear Shift Rod Boot]]> Mon, 17 Aug 2020 17:59:20 +0100

T2 Baywindow Shift Rod Boot / Gear Shift Rod Boot

Aircooled VW Classic Baywindow Gearbox and Clutch Parts

T2 Baywindow all years boot for shift rod


Product Code: 20060027
OE Code: 211711183B
Any Questions, Please Contact Us Here

]]>
new 4899 https://www.limebug.com/media/storage/product/4899/272x212_67740b46448fb58b50b036e5dfa43b9a05d75b9d.jpg 8.65 GB10 Limebug 1 Cars > accessories 0.05 in stock
<![CDATA[T1 T2 T3 Fuel Strainer / Filter for Fuel Tank]]> Mon, 17 Aug 2020 17:59:20 +0100

T1 T2 T3 Fuel Strainer / Filter for Fuel Tank

Aircooled VW Classic Carburettor and Fuel Systems

Plastic fuel strainer / fuel filter for fuel tank


Product Code: 10090236
OE Code: 111209147A
Any Questions, Please Contact Us Here

]]>
new 4898 https://www.limebug.com/media/storage/product/4898/272x212_67dcfc093c36d0e1fc4f654e48f11dd60f5a6454.jpg 3.80 GB10 Limebug 1 Cars > accessories 0.02 in stock
<![CDATA[T1 T2 T3 Anchor Pin For Parking / Handbrake Leaver]]> Mon, 17 Aug 2020 17:59:19 +0100

T1 T2 T3 Anchor Pin For Parking / Handbrake Leaver

Aircooled VW Classic Brake and Handbrake Parts

Securing / Anchor pin for parking handbrake lever  


Product Code: 40060044
OE Code: 211609601B
Any Questions, Please Contact Us Here

]]>
new 4897 https://www.limebug.com/media/storage/product/4897/272x212_7d5cd1332f2c039396f012c070c4286433e920dc.jpg 2.22 GB10 Limebug 1 Cars > accessories 0.02 in stock
<![CDATA[Universal Bulb For Indicator / Brake Light 12v 21W 15S]]> Mon, 17 Aug 2020 17:59:18 +0100

Universal Bulb For Indicator / Brake Light 12v 21W 15S

Aircooled VW Classic Electrical Parts / Bulbs

Universal bulb for indicator signal / brake stop lights. Single fillament bulbs 12v 21W 15S fitting. 


Product Code: 100010088
OE Code: N0177322
Any Questions, Please Contact Us Here

]]>
new 4896 https://www.limebug.com/media/storage/product/4896/272x212_e8083565865d1f31831e00553d9c1b9f475271e3.jpg 2.50 GB10 Limebug 1 Cars > accessories 0.02 in stock
<![CDATA[T1 T2 T3 Gearbox Input Shaft Oil Seal Main Drive Shaft Seal]]> Mon, 17 Aug 2020 17:59:17 +0100

T1 T2 T3 Gearbox Input Shaft Oil Seal Main Drive Shaft Seal

Aircooled VW Classic Gearbox parts

Oil seal for gearbox input shaft / main drive shaft. 


Product Code: 20900027
OE Code: 113311113A
Any Questions, Please Contact Us Here

]]>
new 4895 https://www.limebug.com/media/storage/product/4895/272x212_b8c0db6143348150935c2fdabb6d346b2178283a.jpg 2.90 GB10 Limebug 1 Cars > accessories 0.02 in stock
<![CDATA[T1 T2 Radial Shaft Oil Seal For Gearbox Selector Shaft Shift Rod Nose Cone Seal]]> Mon, 17 Aug 2020 17:59:17 +0100

T1 T2 Radial Shaft Oil Seal For Gearbox Selector Shaft Shift Rod Nose Cone Seal

Aircooled VW Classic Beetle and Baywindow Gearbox parts

Oil seal for shift rod / Shaft seal for Gearbox selector.

 

Fits

T1 Beetle 1200, 1600 - 1968 -85

T2 Baywindow 1600, 2ltr - 1967-79

T25 1.6D, 1.6, 1.8t and 2.0 - 1979-82


Product Code: 20060026
OE Code: 1301227
Any Questions, Please Contact Us Here

]]>
new 4894 https://www.limebug.com/media/storage/product/4894/272x212_75d895164eb01f89530ca2ce62022ba48d7821fe.jpg 5.65 GB10 Limebug 1 Cars > accessories 0.02 in stock
<![CDATA[T1 1965-67 Beetle / Ghia Single Circuit Brake Master Cylinder LHD/RHD]]> Mon, 17 Aug 2020 17:59:16 +0100

T1 1965-67  Beetle / Ghia Single Circuit Brake Master Cylinder LHD/RHD

Aircooled VW Classic Dual Circuit Brake Master Cylinder

Single circuit brake master cylinder for T1 Beetle / Karmann Ghia 1965-67 LHD and RHD models, does not include reservoir or brake light switch.  


Product Code: 40050043
OE Code: 113611023B
Any Questions, Please Contact Us Here

]]>
new 4893 https://www.limebug.com/media/storage/product/4893/272x212_6b537d6b12db06a7d5362a926000e90980ab4527.jpg 29.10 GB10 Limebug 1 Cars > accessories 2.50 in stock
<![CDATA[Universal Bulb For Side Lights / Side Lamps 6v 4w BA9S]]> Mon, 17 Aug 2020 17:59:15 +0100

Universal Bulb For Side Lights/Side Lamps 6v 4w BA9S

Aircooled VW Electrical Parts / Lights and Components

Universal bulb for side light/ side lamp 6v 4w BA9S connection clear


Product Code: 100010087
OE Code: N0177171
Any Questions, Please Contact Us Here

]]>
new 4892 https://www.limebug.com/media/storage/product/4892/272x212_266e2c8f1b68151a62df75479ff935bc0e07820f.jpg 2.50 GB10 Limebug 1 Cars > accessories 0.05 in stock
<![CDATA[Universal Bulb For Side Lights / Side Lamps 12v 4w BA9S]]> Mon, 17 Aug 2020 17:59:14 +0100

Universal Bulb For Side Lights/Side Lamps 12v 4w BA9S

Aircooled VW Electrical Parts / Lights and Components

Universal bulb for side light/ side lamp 12v 4w BA9S connection clear


Product Code: 100010086
OE Code: N0177172
Any Questions, Please Contact Us Here

]]>
new 4891 https://www.limebug.com/media/storage/product/4891/272x212_3f2c9682553e27c19aec5fa316f9dc0b6745e95f.jpg 2.50 GB10 Limebug 1 Cars > accessories 0.05 in stock
<![CDATA[Universal R2 Headlight Bulb 12v P45T 45/40W]]> Mon, 17 Aug 2020 17:59:13 +0100

Universal R2 Headlight Bulb 12v P45T 45/40W

Aircooled VW Electrical Parts / Lights and Components

 

Universal R2 Headlamp Bulb, 12v 45/40W with P45t contact


Product Code: 100010085
OE Code: N0177053
Any Questions, Please Contact Us Here

]]>
new 4890 https://www.limebug.com/media/storage/product/4890/272x212_c01e1aeeed2980db975485066ec4264a9025ca5e.jpg 2.98 GB10 Limebug 1 Cars > accessories 0.08 in stock
<![CDATA[Universal Bulb for Indicator / Turn signal 6v 21W]]> Mon, 17 Aug 2020 17:59:11 +0100

Universal Bulb for Indicator/Turn signal 6v 21W

Aircooled VW Electrical Parts / Lights and Components

 

Universal fit indicator / turn signal single fillament bulb clear, 6v 21w.


Product Code: 100010084
OE Code: N0177321
Any Questions, Please Contact Us Here

]]>
new 4889 https://www.limebug.com/media/storage/product/4889/272x212_b358c050affc8f37fa5f2bd474a61dd30b9ba958.jpg 1.95 GB10 Limebug 1 Cars > accessories 0.08 in stock
<![CDATA[Universal Brake / Tailight Bulb 6v 21/5W]]> Mon, 17 Aug 2020 17:59:10 +0100

Universal Brake/Tailight Bulb 6v 21/5W

Aircooled VW Electrical Parts / Lights and Components

 

Universal fit brake light and taillight double fillament bulb, 6v 21/5w.


Product Code: 100010083
OE Code: N0177381
Any Questions, Please Contact Us Here

]]>
new 4888 https://www.limebug.com/media/storage/product/4888/272x212_9b062bb45d1b4a004ba6e1146a56f8765ea2d434.jpg 1.95 GB10 Limebug 1 Cars > accessories 0.08 in stock
<![CDATA[Halogen H4 Bulb 6v Universal Headlamp Bulb P45T 80/55W]]> Mon, 17 Aug 2020 17:59:09 +0100

Halogen H4 Bulb 6v Universal Headlamp Bulb P45T 60/55W

Aircooled VW Electricla Parts / Lights and Components

Halogen Headlight Bulb H4 6v 60/55w Clear

Double element with P45T contact


Product Code: 100010082
OE Code: N0177051
Any Questions, Please Contact Us Here

]]>
new 4887 https://www.limebug.com/media/storage/product/4887/272x212_d97b8dcf126089010f72428dda268783eab768aa.jpg 8.10 GB10 Limebug 1 Cars > accessories 0.20 in stock
<![CDATA[T2 1968-79 Bay Window Dual Circuit Brake Master Cylinder LHD / (RHD -75)]]> Mon, 17 Aug 2020 17:59:08 +0100

T2 1968-79 Bay Window Brake Master Cylinder LHD / (RHD -75)

Aircooled VW Classic Dual Circuit Brake Master Cylinder

Dual Circuit brake master cylinder for Baywindow 1968-79 LHD, please note only fits RHD models upto 75. Does not include reservoir or brake light switch.


Product Code: 40050042
OE Code: 211611021AA
Any Questions, Please Contact Us Here

]]>
new 4886 https://www.limebug.com/media/storage/product/4886/272x212_35d2d7e96149af44e4a94d4cb6a76e047726880d.jpg 53.60 GB10 Limebug 1 Cars > accessories 3.00 in stock
<![CDATA[T2 Split Screen Deluxe Front Air Ride Kit Beam / Front Air Kit (Bolt on) - P2B T2B]]> Wed, 28 Jul 2021 02:33:59 +0100

True Bolt-on Fully Adjustable Air Ride Beam for T2A Split Screen Buses Vans

Coming Soon!


Product Code: 30020199
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4884 https://www.limebug.com/media/storage/noimage.jpg 1699.99 GB10 Limebug 1 Cars > accessories 45.00 in stock
<![CDATA[T1 Beetle Smiths OE Style Analogue Clock Gauge, 52mm]]> Wed, 28 Jul 2021 02:33:59 +0100

T1 Beetle Smiths OE Style Analogue Clock Gauge, 52mm

Aircooled VW Digital, Mechanical and Performance Gauges / Meters

 

Smiths 12V Analogue Clock Needle face with a Silver Bezel

Fitting:

Designed to work with 12 volt vehicles.

Metrics:

52mm Gauge

Details:
 - 12 Volt Gauge


Product Code: 100030064
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4883 https://www.limebug.com/media/storage/product/4883/272x212_678d8b46d8b4637da1a263ed6f2b835a920001ec.jpg 63.20 GB10 Limebug 1 Cars > accessories 0.30 in stock
<![CDATA[T2 -67 Smiths OE Style Black,Fuel Gauge, 52mm]]> Wed, 28 Jul 2021 02:33:59 +0100

T2 -67 Smiths OE Style Black, Fuel Gauge, 52mm

Aircooled VW Digital, Mechanical and Performance Gauges / Meters

 

Smiths 12V Oil Temp Gauge. OE Style. Black face with a Silver Bezel

Fitting:

Designed to work with VDO Fuel Senders, Can also be fitted to 68- Beetles with electronic 12v sender units.

Metrics:

52mm Gauge

Details:
 - 12 Volt Gauge


Product Code: 100030063
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4882 https://www.limebug.com/media/storage/product/4882/272x212_2ca6b4dd2729617e8c6ad529ab6133e82a8cc68d.jpg 57.85 GB10 Limebug 1 Cars > accessories 0.30 in stock
<![CDATA[Mooneyes Key Ring Yellow Moon Rubber]]> Wed, 28 Jul 2021 02:33:59 +0100

 

Mooneyes Key Ring Yew Moon Rubber:

 

Mooneyes Rubber Key Fob Key Ring

Mooneyes Yellow Rubbery Key Ring, comes with hoop and small chain, great gift for the hotrod owner or fan


Product Code: 120010009
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4880 https://www.limebug.com/media/storage/product/4880/272x212_e6d909c04f02e26ff21ab10abdcd83c5464f0166.jpg 5.70 GB10 Limebug 1 Cars > accessories 0.15 in stock
<![CDATA[Shrunken Head 5" Large Interior Mirror Hanger]]> Wed, 28 Jul 2021 02:33:59 +0100

Original Mooneyes Shrunken Head

Available in Small (3.5" Tall), and Large (5" Tall)

Rubber Reproduction Head.

Dangles from your interior mirror
Sold individually

As history says the tribe of tsanta from the Amazon Jungle use to slay there victims and take there heads as away of capturing there souls, so that they were unable to hunt them in there after life or hurt there families.


Product Code: 90050016
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4878 https://www.limebug.com/media/storage/noimage.jpg 19.95 GB10 Limebug 1 Cars > accessories 0.40 in stock
<![CDATA[PEDAL MOON FOOT RH]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 90040025
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4877 https://www.limebug.com/media/storage/noimage.jpg 52.45 GB10 Limebug 1 Cars > accessories 0.25 in stock
<![CDATA[Moon Eyeball Logo 18" Yellow Decal ]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 80060023
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4875 https://www.limebug.com/media/storage/product/4875/272x212_eb12d0652b78fa1963a913b39348a18c14ea9a2d.jpg 14.65 GB10 Limebug 1 Cars > accessories 0.40 in stock
<![CDATA[MOON Eyeball Logo 3" Yellow Decal ]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 80060015
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4874 https://www.limebug.com/media/storage/product/4874/272x212_362365030c3d649f6ac8ee479d895ffb9cb7844a.jpg 4.95 GB10 Limebug 1 Cars > accessories 0.10 in stock
<![CDATA[MOON Eyeball Logo 5" Yellow Decal ]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 80060014
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4873 https://www.limebug.com/media/storage/product/4873/272x212_9b0a1bf35f6c4d6b37fba503bea93156967f7f1d.jpg 5.65 GB10 Limebug 1 Cars > accessories 0.10 in stock
<![CDATA[Clay Smith 'Mr Horsepower' Decal Sticker Medium Right]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 80060009
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4871 https://www.limebug.com/media/storage/product/4871/272x212_1df6a9a5d54fc183cf249488946ec10554417368.jpg 4.10 GB10 Limebug 1 Cars > accessories 0.10 in stock
<![CDATA[Clay Smith 'Mr Horsepower' Decal Sticker Medium Left]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 80060008
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4870 https://www.limebug.com/media/storage/product/4870/272x212_1bed07eae7d907d14a6c2d63d20896d7f4dbfccc.jpg 4.10 GB10 Limebug 1 Cars > accessories 0.10 in stock
<![CDATA[Clay Smith 'Mr Horsepower' Decal Sticker Large Right]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 80060007
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4869 https://www.limebug.com/media/storage/product/4869/272x212_ef03cda349666fe1a5ae1be0487f602f6c6ef0ca.jpg 4.99 GB10 Limebug 1 Cars > accessories 0.10 in stock
<![CDATA[Clay Smith 'Mr Horsepower' Decal Sticker Large Left]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 80060006
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4868 https://www.limebug.com/media/storage/product/4868/272x212_75ae34ab1e9521d6c4797b695af85c244a5c67df.jpg 4.99 GB10 Limebug 1 Cars > accessories 0.10 in stock
<![CDATA[Clay Smith 'Mr Horsepower' Decal Sticker Small Right]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 80060005
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4867 https://www.limebug.com/media/storage/product/4867/272x212_29730c2b0a1dbd9728dc10d25ef6431c83b8787e.jpg 3.50 GB10 Limebug 1 Cars > accessories 0.10 in stock
<![CDATA[T-SHIRT MOON EQUIP SHOP WH S-XXL]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 110010018
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4866 https://www.limebug.com/media/storage/product/4866/272x212_b725fa1fc20d2cb5daa000eb5d68208bcb7b4b05.jpg 28.45 GB10 Limebug 1 Cars > accessories 0.40 in stock
<![CDATA[T1 Beetle / Ghia Gen-II All Years Modular Upper Shock Towers Titan for Static Beams Shockless, Pair]]> Wed, 28 Jul 2021 02:33:59 +0100


Product Code: 30020222
OE Code:
Any Questions, Please Contact Us Here

]]>
new 4865 https://www.limebug.com/media/storage/product/4865/272x212_c78e8c602aef0c21a9a3317d40cffb7369e8d842.jpg 37.50 GB10 Limebug 1 Cars > accessories 2.80 in stock