T1 1966-79 Beetle Ball Joint Beam (Stock Width)

T1 1966-79 Beetle Ball Joint Stock Width Beam Aircooled VW Beetle and Ghia Ball Joint Stock Width Beams, the industry standard in quality Titan…

  • 030020054

  • Limebug

  • Special Order Item (Estimated 2 Weeks)


T1 1966-79 Beetle Ball Joint Stock Width Beam

Aircooled VW Beetle and Ghia Ball Joint Stock Width Beams, the industry standard in quality

Titan Engineering T1 Ball Joint Beetle Beam Stock Width, installation is simple and easy with no body modifications. Each beam is built by robots in the UK and fettled to spec by hand. Limebug is the leading supplier of beams in the industry.

Each beam is produced from CDS (Cold Drawn Steel) Seamless tubing, then turned to length, each adjuster slot is then milled into the tubing along with the 4x grease points. Next we fit our custom Xero adjusters in place which give over 7.5" of adjustment travel. These adjusters are set in place in such a way as to achieve maximum drop and still give a great range of upper adjustment on nearly all configurations. 

Next we laser cut 8mm steel into our beautifully designed end plates, these are then CNC press braked to form a dog leg which will clear all factory inner wings on your new 4" beam with no cutting, welding or drilling.

For the final step in the metal core assembly process, we precision load the components into the robot welding cell, at this point we fit our ramped base 'uprights' which have oversize holes for simple easy installation on all frame heads. 

Now the core is built we install our uniquely designed grease cavity / Delrin bushings system. This configuration allows the use of Delrin bushes which have great low wearing properties and will not damage your trailing arms over time, they also do not squeak like Urethane. Finally this also allows you to run factory grease seals keeping your grease in the beam, where it should be. 

So that's how the industry standard of front axles is made and some of the fantastic features it offers. All beams have the option to a powder coated finish, RHD / LHD,  torsion leaves, track rods etc etc. Let Limebug cut out the guesswork and have a hassle free install.

We can now offer worldwide shipping on all Limebug beams. Typically holding over one hundred beam cores on the shelf we can supply the industry standard in quality and finish.

 - CDS Mech Grade Tubing
 - 8mm Lasercut End-plates
 - CNC Body Mounts & Shock Mounts
 - Dog Leg Shock Tower Support
 - Unique Grease Cavity System
 - Genuine Derlin Bushes
 - 4x Grease Nipples Fitted 
 - Custom Steering Damper Mount Fitted
 - RHD or LHD
 - Supplied in Raw Finish or Powdercoated
 - Designed, Manufactered and Assembled in the UK


Titan Engineering "Sawtooth" Skid Plates 

Features a steep ramped front edge to deflect the road and debris away from your beam when running extra low. Protects your adjuster unit as well as still allowing adjustability through the access hole.

Sawtooth plates are provided raw unless otherwise stated. Comes with two extended frame head bolts and washers which is all that is required for fitting.

Will fit all Ball Joint and K&L Pin Beams, hole is slotted to allow you to bring the plate up flush to the base of your frame head.

Product Code: 30020054
OE Code:
Any Questions, Please Contact Us Here

Classic VW Parts, Spares & Accessories

Amazing Customer Service

Everyone on our customer care team is an experienced VW owner and works in our office. Rest easy knowing real people are ready to help you.

Nothing is ever outsourced.View All Products

Latest How To Guide

Jim Dandy Rack Fitting Instructions

Jim Dandy Rack Fitting Instructions /Disclaimer   WATCH FOR SHARP EDGES. FILE IF NEEDED. ESPECIALLY ON THE 6 STRAIGHT TUBES!! FOR INDOOR DISPLAY PURPOSES ONLY!!   The purchaser (owner) of this kit assumes all liability in the assembly and use…

Read More